How To Build Rustic Wall Sconce
How To Build Rustic Wall Sconce – Building a traditional wooden wall sconce for your home to add a rustic country style to any room. The soft glow of the candles provides subtle illumination to the wall.
Place board for rustic wall sconce on the table in a drill press. Drill board 1/2-inch 5/8-inch diameter deep into the middle of the block with a drill press and a 5/8-inch drill bit. Place board with side flat on the table of the drill press. Drill a hole through the middle of the width of a 3-inch end down two inches from one end using the drill press equipped with a 1/8-inch drill.
12 Photos Gallery of: How To Build Rustic Wall Sconce
Place board for rustic wall sconce flat on a work surface. Orient the board away from you with the mounting hole on the top end. Place the edge of the board on top of the mounting board up 6 inches from the lower end. Run three evenly spaced wood screws through the back of the mounting board of the landing card with a screwdriver. Brush on two even layers of wood finishes over the church with a brush. Let the first layers to dry in 4 hours. Wait 24 hours for the last layer to dry. Select a location for the sconce on the wall. Hammer a wrought iron nail in the wall at the desired location. Slide the mounting hole of the nail to hang on the wall sconce.Wood wall sconces oriental