How To Frequent Outdoor Wall Lights – When installing outdoor wall lights, you must seal the light from penetrating moisture. If moisture penetrates the wall of light, the light will short out and become a fire hazard, or the relations within the outdoor wall lamp corrode and the light will not work. You do not need to seal around the light, precisely the areas that water can penetrate. The standard caulking patterns seals three sides by walls of light, but the frequent need to completely seal around these
Wipe the area around the outdoor wall lights with a clean cloth to remove dust, dirt and debris from the wall and console. Put tube of dense to drop-in caulking gun with nozzle facing away from the trigger and cut the nozzle at a 45-degree angle with a 1 / 8th-inch opening. Squeeze the handle of the gun to start the flow of the seal from the tube and release the pressure from the caulking gun by pressing the lever or turning the rod seal the gun and pull it away from the tight tube. Wipe the excess seal from the top of frequent tube with a clean cloth.
Place the tip of the tube seal against the wall with the tip aimed at the location where the mounting frame for outdoor wall lights meets house siding. Run a bead seal down both sides of the wall outdoor light and another at the top. Release the pressure from the caulking gun. Wet your finger in the water bowl and slide your finger along the sealing bead to give it a finished look. Inspect the bead of caulk to ensure that there are no air pockets in the sealing bead.