Modern flush mount lighting – In Modern flush mount lighting is one that feels completely against the wall or ceiling, as opposed to hanging from a rod or chain. Flush mounting is the most common type of outdoor lighting system, as a light hanging can be dangerous on windy days. Installing an outdoor light is the same process as installing an inner light, except that it is a good idea to wrap the connections in electrical tape to provide extra protection against the elements. Only use light fixtures that specify the use outdoors, as they are made with weather resistant materials.
Install a modern flush mount lighting exterior, Power 1 Cut to the existing external lamp in the fuse box or circuit breaker. Remove the accessory by removing the screws holding it to the electrical box. Disconnect the wires behind the light, untwisting the wire nuts that united them. Pull the lamp, revealing a white wire, black wire and cable bare ground. Lift the mounting bracket of your new light to the electrical box. Ensure that exists with the screws provided with the set. Wrap the bare wire box around the green ground screw on the stand. Tighten the screw.
13 Picture Gallery: Install a Modern Flush Mount Lighting Exterior
Install a modern flush mount lighting exterior, Connect the black wire to the black box cable fixture by holding the two ends of bare wire next to each other and turning the wire nut on both. Wrap insulating tape around each of the two connections, sealing completely. Set the match against the support, tucking wiring into the electrical box as it does. The entire base of the luminaries must sit flush with the surface, which covers the whole box and the area around it. Secure the light for fixing the screws that came. Turn on electricity at the fuse box or circuit breaker.
This post topic: Other Furniture